Installation Procedures
Preparation before Installation
(1) If necessary, make a hole for installation and access in the ceiling. (used for installation in a ceiling)
•
For the size of the inspection hole in the ceiling, please refer to the above drawing.
•
Before installation, finish all the preparations for all piping connected to indoor units (refrigerant, water,
drainage) and wiring (connection line of the line control, connection line between indoor units and outdoor
unit)so that they can be connected with indoor units right after installation.
•
For the inspection hole, the ceiling might be reinforced to maintain the evenness of the ceiling and avoid
the vibration of the ceiling. For details, please consult the construction contractor.
(2) Install the hanger bolts (M10 bolts)
• In order to support the weight of the unit, use barb
bolts for installing in a ceiling. For installation in a
new ceiling, use inlaid bolts, embedded bolts or
other parts provided on site. Before proceeding with
the installation, adjust the gap between the bolt and
the ceiling.
right
top
248
notch grapping
notch plug
Hanger bolt M10
Hanger bolt M10
M10shim
M10nut
M10 spring washer
Level meter
concrete
plug
C
E A
(3) Installation of Indoor Units
•
Fix the indoor unit with the hanger bolt. If
necessary, the machine can be hung
on the beam.
Adjusting the level
Adjust the level with a level meter or in the
following ways:
• Make the adjustment as shown in the figure.
Size
Model
A
(mm)
C
(mm)
E
(mm)
40VD005-016S-7S-QEE 761
619
700
40VD018-030S-7S-QEE 1161
619
1100
40VD038-054S-7S-QEE 1561
619
1500
Main unit
768
7
Summary of Contents for 40VU007-054H-7S-QEE
Page 8: ...Parts and Function Indoor unit air outlet port air inlet port air duct soft connection 1...
Page 31: ...The manufacturer reserves the right to change any product specifications without notice...
Page 108: ...Der Hersteller beh lt sich das Recht vor Produktspezifikationen ohne Vorank ndigung zu ndern...
Page 160: ...O fabricante reserva se o direito de alterar as especifica es do produto sem aviso pr vio...