40
DISASSEMBLY INSTRUCTIONS (CONT)
5 Remove
the fan
motor
Refer to step 2 of No.1
Press the clips to remove the volute shell
Press
Press
5 screws
Rear cover board
Total of 4 screws at the left and right sides
The fan motor
assembly and
fan wheel
assembly can be
removed after
taking off the 2
screws used to
secure the fan
motor holder.
Take off the screw to remove the fan wheel.
Cut off the fastening
belt to remove the
room temperature
sensor
Stickers
Rear beam
1
Unscrew the securing
screws to remove the rear
cover board.
2
Unscrew the securing
screws to remove the rear
beam.
3
Remove the room
temperature sensor.
4
Remove the sticker.
5
Remove the lower volute
shell.
6
Remove the fan motor
wire from the electronic
control box.
7
Disassemble the fan
motor fixing clamps to
remove the fan motor
assembly and fan wheel
assembly.
8
Disassemble the fan
wheels, then you can
remove the fan motor.