Carrier 30XW Installation, Operation And Maintenance Instructions Download Page 2

Page: 2 / 36

CONTENTS

1 - INTRODUCTION ..................................................................................................................................................................... 4

1.1 - Installation safety considerations ........................................................................................................................................... 4

1.2 - Equipment and components under pressure ........................................................................................................................ 5

1.3 - Maintenance safety considerations ........................................................................................................................................ 5

1.4 - Repair safety considerations ................................................................................................................................................... 7

2 - PRELIMINARY CHECKS ...................................................................................................................................................... 8

2.1 - Check equipment received ...................................................................................................................................................... 8

2.2 - Moving and siting the unit ....................................................................................................................................................... 9

3 - DIMENSIONS, CLEARANCES ........................................................................................................................................... 10

3.1 - 30XW--/30XWH- 254-852 – 30XW-P/30XWHP 512-862 ................................................................................................... 10

3.2 - 30XW--/30XWH- 1002-1552 – 30XW-P/30XWHP 1012-1464 ........................................................................................... 11

3.3 - 30XW--/30XWH- 1652-1702 – 30XW-P/30XWHP 1612-1762 ........................................................................................... 12

4 - PHYSICAL AND ELECTRICAL DATA ............................................................................................................................ 13

4.1 - Physical data, units without options 150, 5 and 6 ................................................................................................................ 13

4.2 - Electrical data, units without options 150, 5 and 6 ............................................................................................................. 14

4.3 - Short-circuit stability current for all units ........................................................................................................................... 15

4.4 - Compressor electrical data 30XW ........................................................................................................................................ 15

4.5 - Compressor usage per circuit (A, B).................................................................................................................................... 15

5 - ELECTRICAL CONNECTION ............................................................................................................................................ 16

5.1 - Power supply ........................................................................................................................................................................... 16

5.2 - Voltage phase imbalance (%) ............................................................................................................................................... 16

5.3 - Power connection/disconnect switch .................................................................................................................................... 16

5.4 - Recommended wire sections ................................................................................................................................................ 16

5.5 - Power cable entry ................................................................................................................................................................... 17

5.6 - Field control wiring ................................................................................................................................................................ 17

5.7 - 24 and 230 V power reserve for the user ............................................................................................................................. 18

6 - APPLICATION DATA ........................................................................................................................................................... 18

6.1 - Operating limits for 30XW units .......................................................................................................................................... 18

6.2 - Minimum chilled water flow

................................................................................................................................................. 18

6.3 - Maximum chilled water flow

................................................................................................................................................. 18

6.4 - Condenser water flow rate

................................................................................................................................................... 18

6.5 - Standard and optional number of water passes .................................................................................................................. 19

6.6 - Evaporator and condenser water flow rates

....................................................................................................................... 19

6.7 - Variable flow evaporator

....................................................................................................................................................... 19

6.8 - System minimum water volume ........................................................................................................................................... 19

6.9 - Evaporator pressure drop curves ......................................................................................................................................... 20

6.10 - Condenser pressure drop curves ........................................................................................................................................ 20

7 - WATER CONNECTIONS ...................................................................................................................................................... 21

7.1 - Operating precautions ........................................................................................................................................................... 21

7.2 - Water connections .................................................................................................................................................................. 22

7.3 - Flow control ............................................................................................................................................................................ 22

7.4 - Evaporator and condenser water box bolt tightening ....................................................................................................... 22

7.5 - Operation of two units in master/slave mode ..................................................................................................................... 23

8 - HEAT MACHINE UNITS 30XWH- AND 30XWHP ........................................................................................................ 23

8.1 - Physical data for Heat Machine units .................................................................................................................................. 23

8.2 - Electrical data for Heat Machine units ................................................................................................................................ 23

8.3 - Dimensions and clearances for Heat Machine units .......................................................................................................... 23

8.4 - Operating range for Heat Machine units ............................................................................................................................ 23

8.5 - Operating modes for Heat Machine units ........................................................................................................................... 23

Summary of Contents for 30XW





































Search results

Summary of Contents for 30XW

Reviews:

Related manuals for 30XW

Brands by name

Popular brands

Carrier 30XW, Installation, Operation And Maintenance Instructions

Search results

Summary of Contents for 30XW

Reviews:

Related manuals for 30XW

Brands by name

Popular brands