![background image](http://html1.mh-extra.com/html/carrier/30rq-039-series/30rq-039-series_installation-operation-and-maintenance-instructions_2563117022.webp)
22
9 - ElECTRICal DaTa, 30RQS aND 30RQSY UNITS
9.1 - Short-circuit stability current (TN system*) - standard unit (with main disconnect without fuse)
30RQS/RQSY
039
045
050
060
070
078
080
090
100
120
140
160
value with unspecified upstream protection
Short-term current at 1 s - Icw - kA rms
3.36
3.36
3.36
3.36
3.36
3.36
3.36
5.62
5.62
5.62
5.62
5.62
Admissible peak current - Ipk - kA pk
20
20
20
20
20
15
15
20
20
15
20
15
Max. value with upstream protection (circuit breaker)
Conditional short-circuit current Icc - kA rms
40
40
40
40
40
40
40
40
40
40
30
30
Schneider circuit breaker - Compact series
NS100H NS100H NS100H NS100H NS100H NS100H NS100H NS100H NS160H NS160H NS250H NS250H
Reference number**
29670
29670
29670
29670
29670
29670
29670
29670
30670
30670
31671
31671
* Earthing system type
** If another current limitation protection system is used, its time-current and thermal constraint (I²t) trip characteristics must be at least equivalent to those of the
recommended Schneider circuit breaker. Contact your nearest Carrier office.
The short-circuit stability current values above are in accordance with the TN system.
9.2 - Electrical data, hydronic module
The pumps that are factory-installed in these units have motors with efficiency class IE2. The additional electrical data
required* is as follows:
Motors of single and dual low-pressure pumps (options 116f, 116g)
No.** Description***
30RQS/RQSY
039
045
050
060
070
078
080
090
100
120
140
160
1
Nominal efficiency at full load and nominal voltage
%
79.5 79.5 79.5 79.5 79.5 79.5 79.5 79.5 82.3 82.3 81.9 81.9
1
Nominal efficiency at 75% rated load and nominal voltage
%
78.2 78.2 78.2 78.2 78.2 79.5 78.2 78.2 81.8 81.8 81.8 81.8
1
Nominal efficiency at 50% rated load and nominal voltage
%
74.5 74.5 74.5 74.5 74.5 74.5 74.5 74.5 79.7 79.7 79.1 79.1
2
Efficiency level
IE2
3
Year of manufacture
This information varies depending on the manufacturer and model at the time of
incorporation. Please refer to the motor name plates.
4
Manufacturer's name and trademark, commercial registration
number and place of manufacturer
5
Product's model number
6
Number of motor poles
2
2
2
2
2
2
2
2
2
2
2
2
7-1
Rated shaft power output at full load and nominal voltage (400 V) kW
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.25 1.25 1.7
1.7
7-2
Maximum power input (400 V)****
kW
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.5
1.5
2.3
2.3
8
Rated input frequency
Hz
50
50
50
50
50
50
50
50
50
50
50
50
9-1
Rated voltage
V
3 x 400
9-2
Maximum current drawn (400 V)†
A
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
3.1
3.1
4.3
4.3
10
Rated speed
rpm
2838 2838 2838 2838 2838 2838 2838 2838 2892 2892 2863 2863
r/s
47
47
47
47
47
47
47
47
48
48
48
48
11
Product disassembly, recycling or disposal at end of life
Disassembly using standard tools. Disposal and recycling using an appropriate
company.
12
Operating conditions for which the motor is specifically designed
I - Altitudes above sea level
m
< 1000††
II - Ambient air temperature
°C
< 55
IV - Maximum air temperature
°C
Please refer to the operating conditions given in this manual or in the specific
conditions in the Carrier selection programs.
V - Potentially explosive atmospheres
Non-ATEX environment
* Required by regulation 640/2009 with regard to the application of directive 2005/32/EC on the eco-design requirements for electric motors
** Item number imposed by regulation 640/2009, annex I2b.
*** Description given by regulation 640/2009, annex I2b.
**** To obtain the maximum power input for a unit with hydronic module add the maximum unit power input from the electrical data table to the pump power input.
† To obtain the maximum unit operating current draw for a unit with hydronic module add the maximum unit current draw from the electrical data table to the pump current
draw.
†† Above 1000 m, a degradation of 3% for each 500 m should be taken into consideration.
Summary of Contents for 30RQ 039 Series
Page 49: ......