Be sure the AUTO/OFF/MANUAL switch is set to
the OFF position, before connecting the battery
cables. If the switch is set to AUTO or MANUAL,
the generator can crank and start as soon as the
battery cables are connected.
Be sure the 120VAC power supply to the battery
is turned OFF, or sparking may occur at the bat-
tery posts as the cables are attached and cause
an explosion.
BATTERY REPLACEMENT
NOTE:
Unit DOES NOT include battery.
When supplying or replacing the battery, the recom-
mended number and type of battery is listed in the
Specifications Section.
NOTE:
The BCI number should be located directly on the
battery.
REPAIR PARTS
The later portion of this manuals consists of exploded
views, parts lists and electrical data pertaining to this
generator set. The parts list consists of: (a) an Item
Number, (b) a Part Number, (c) Quantity required,
and (d) a Description of the part. The Item Number
corresponds to an identical number on the exploded
view drawing.
Standby Generator Sets
Maintenance
10-5
Maint018 Rev.
B 07/08
Summary of Contents for 2.4L
