40
MASTERseries Release 6.01 - Quick Start Guide
Basic Configuration
ATM Configuration
Assumptions
User has logged in with sufficient privileges.
Starting with new configuration.
Overview
This example demonstrates how to configure the MASTERseries.
1. Traffic will come in 1L01 (GSM) and 1L02 (TDM) and go out DS3 ATM backhaul (using
2D01).
2. Single Timeslot CES - 1P01 (v.35) connected to msrv 2M08 and transported out 2D01. This
takes a timeslot from an ATM backhaul VC and drops it to a port.
Step 1 - Designate ATM Links
Links on the MASTERseries are by default TDM links. Decide which links you want use for ATM.
In this configuration, we will map:
Circuit Emulation (CES) can be used only on MSRV links #M01 - #M08. 1 - 8. CES converts TDM
traffic to ATM backhaul.
Step 2 - Map the Physical Ports to Virtual Ports
To get from the TDM side to the ATM side you have to
map the connections through the msrv ports.
The following describes how to map physical port 1L01 to ATM Virtual Port 2M01 (on the Wintegra)
using all 24 TS (Timeslots)
1. From the main screen, press the C key to go to the Connect screen. Press
enter.
2. At the No. prompt select link 1L01. Press enter.
3. Select timeslot TS01 and press enter to move to the Type column.
1L01 to 2M01
1L02 to 2M02
TDM
MSRV
ATM
C (Connect)
