How to Assemble and Operate the Vacuum
How to Attach the Handle to the Vacuum Cleaner
The vacuum and the handle are packed separately�
1� After first removing the handle screw, slide the handle into the
slots on top of the vacuum cleaner� (Fig� 1)
2� Line up the small hole on the handle with the small hole on the
vacuum cleaner and insert the screw� Make sure the screw is
tightened securely�
4� Turn the upper cord storage hook to the upright position and wind
the power cord around the cord storage hooks when storing the
vacuum cleaner (Fig� 2)�
How to Release the Power Cord
1� The upper cord storage hook has a quick-release action�
To release the cord, rotate the hook downward and the cord will
drop off the handle for immediate use (Fig� 3)�
2� Return the hook to the upright position before attempting to
rewind the cord�
On/Off Switch (Fig� 3)
1� To turn the vacuum on, push the switch located on the side of the
bag compartment the ( I ) position�
2� To turn the vacuum off, push the switch located on the side of the
bag compartment the ( 0 ) position�
Fig� 1
Fig� 2
Fig� 3
5
How to Change the Vacuum Bag
On/Off switch
Cord Release
Fig� 2
Fig� 3
Fig� 1
Always operate the vacuum cleaner with a vacuum bag installed�
How to Change the Vacuum Bag
1� Unplug the vacuum cleaner� Remove the bag compartment door
(Fig�1)�
2� Remove the bag from the bag holder� Attach the new vacuum
bag onto the bag holder (Fig� 2)�
3� Pull the bottom corners of the new vacuum bag (Fig� 3)�
4� Reinsert the tab on the end of the bag compartment door into the
groove on the bag compartment housing� Press it into place clos-
ing the bag compartment door tightly�
Summary of Contents for CPU-75
Page 12: ......
