Handle Adjustments
The handle on this vacuum cleaner can be set to one of three positions – upright,
middle or low�
How to Adjust the Handle
1� To release the handle, step on the foot pad on the top left of the vacuum cleaner
(Fig�1)�
2� Middle position – for normal cleaning (Fig� 2)�
3� Upright position – for when cleaning tools are used or for
storage (Fig 3)� Handle locks in this position�
4� Low position – for cleaning under furniture* (Fig� 4)�
*Once in the middle position, step on the foot pad again to place the vacuum in
the low position�
6
Fig� 1
Fig� 4
Filters
Your vacuum cleaner is equipped with a secondary filter and a foam filter� These
filters capture fine dust particles and protect the motor from dirt� Accumulated dirt in the
bag compartment will be collected on the filters and may restrict motor performance� It
is important to change the filters regularly — approximately once every six months or
as needed�
To Change Secondary Filter:
1� Unplug the vacuum cleaner� Remove the bag compartment cover and remove
the vacuum bag�
2� Remove the secondary filter by sliding it out from under the bag supporter� (Fig� 5)�
3� Insert a new filter and replace the bag compartment cover�
Fig� 5
Edge Cleaning Feature
For best results when cleaning carpets near walls and stationary furniture, place the right side of the vacuum nozzle
along the wall or furniture�
Fig� 2
Fig� 3
Summary of Contents for CPU-75
Page 12: ......
