3.6.1 Network
Figure 3-16 Network Settings Interface
See Figure 3-16 for the network settings interface. A gateway has two LANs, each of which can be
configured with independent IP address, subnet mask, default gateway and DNS server. The
Bond feature when enabled will make the information of LAN1 and LAN2 duplicated and backed
up so as to realize the hot-backup function between LAN1 and LAN2. By default, this feature is
disabled
. On this interface, SIP Address is used to select the IP address for SIP signaling, using
LAN 1 by default; SIP Signaling Port is used to set the monitoring port for SIP signaling, with the
value range of 5001~65535 and the default value of 5060.
Note: 1. The two configuration items IP Address and Default Gateway cannot be the same
for NET 1 and NET 2.
2. By default, Speed and Duplex Mode is hidden, set to Automatic Detection, and you
can click ‘F’ to let it display. We suggest you do not modify it because the
non-automatic detection may cause abnormity in network interface.
C
UMG Gateway User Manual (Version 1.6.3)
Page 18
