CarpeStar CUMG Series, User Manual

Page: 18 / 38

Item Description
Index
The unique index of each subboard group, which is mainly used in the configuration
of routing rules and number manipulation rules to correspond to subboard groups.
Description More information about each subboard group.
Subboards
The subboards in the subboard group. If the checkbox before a subboard is grey, it
indicates that the subboard has been occupied. The ticked subboards herein will be
displayed in the column ‘Subboards’ in Figure 3-8.
After configuration, click Save to save the settings into the gateway or click Close to cancel the
settings.
Click Modify in Figure 3-8 to modify a subboard group. See Figure 3-10 for the subboard group
modification interface. The configuration items on this interface are the same as those on the Add
New Subboard Group interface.
Figure 3-10 Modify Subboard Group
To delete a subboard group, check the checkbox before the corresponding index in Figure 3-8
and click the
Delete button. Check All means to select all available items on the current page;
Uncheck All means to cancel all selections on the current page; Inverse means to uncheck the
selected items and check the unselected. To clear all subboard groups at a time, click the Clear
All button in Figure 3-8.
3.5 Route Settings
Route Settings is used to specify the routing rules for calls from IP to TEL/PSTN. See Figure 3-11.
Figure 3-11 Route Settings
C
UMG Gateway User Manual (Version 1.6.3)
Page 13