4. Adjust the controls
The controllers are fully automatic and do not need to be taught.
We recommend to solder the cables firmly to the motors after a successful
adjustment. The screws supplied by us have a left and a right direction.
This is important to allow the best possible directional stability.The direction
of the screws should be installed towards the outside of the boat
Congratulations, now the hull is ready !!!!!!!!!!I<
mportant: the assembled lower shell can now be tested in the water and the
running behavior can be assessed.
14
14
14
Summary of Contents for XXL 2020
