Carp Madness XXL 2020, Instructions Manual

Page: 5 / 23

Attention: The shaft should be well lubricated before the insertion and the assembly.
This serves on the one hand for lubrication but also to achieve a good tightness of the
shaft position.
This step is one of the most important, it requires the utmost care. That step determines
the later quiet and smooth running. It is also very important that both motors are installed
absolutely in the same position.
Caution: always carry out the bonds fully, do not save on the adhesive, epoxy resin can
be used and for example. be made thicker with a little baking soda. But we recommend
Sika Flex or a good adhesive silicone.
Our supplied screws are for "without herb protection". That's how the boat runs very well.
555