Operation and Maintenance
Smart Command Intelligent Eco Valve
2. Safety
2. Safety
3. Installation instructions
3. Installation instructions
Please observe the prescribed values for voltage and power (see specifications).
Work on electrical installations or controls must be made by qualified electricians only.
Disconnect the mains adapter and remove the battery prior to working on the installation.
Regularly check the mains adapter and have it removed by a qualified electrician in case it is damaged.
2.4 Maintenance and repair work
2.4 Maintenance and repair work
Maintenance and repair work must be done by qualified and authorised Caroma specialists only. They are
considered authorised specialists because of their vocational training, instruction or experience to do the required
intervention, detect and prevent potential risks from occurring in pursuing their activities. They must be able to
provide evidence about their knowledge of the relevant safety standards, safety regulations and health and safety
regulations, and they must have read the instructions for use.
The Caroma Eco Valve communicates via Bluetooth
®
.
In unfavourable ambient conditions, in buildings or rooms with walls made of reinforced concrete, steel or iron
frames or near metal barriers (e.g. pieces of furniture), radio reception may be impaired or interrupted. Possibly, an
additional Gateway will have to be installed to increase the range of the radio signal.
The Caroma Eco Valve must be installed in frost-proof, non-condensing rooms. The Caroma Eco Valve must
NOT
be
installed in inaccessible ducts.
Once installed and commissioned, the Caroma Eco Valve should be connected to the Caroma Smart Command
system to enable remote monitoring and configuration.
