INVISI
™
SERIES II
INVISI
™
SERIES II
Removing Internal Components through Access Window
1
1
- Pre Installation
1
- With Button Panel
1
- With Blank Access Panel
2
3
4
5
6
7
13
Dust Cover
“click”
“click”
Inlet
Valve
Assembly
“squeeze”
Bridge
Assembly
Outlet
Valve
Flexible Hose
Ball Valve
Inlet Valve
Face Plate
Panel Assembly
Face Plate
Panel Assembly
Blank Access
Panel
Full Flush
Disconnect Flexible Hose from the Inlet
Valve and the Ball Valve.
Lift tab and slide the Inlet Valve Bracket to
the left.
Remove the Bridge Assembly by squeezing
tabs front and back to disengage from
locking tabs inside the tank.
Lift the Outlet Valve to disengage from
guide ribs in the base of the tank and lay
over on its side.
Rotate and remove the Inlet Valve.
Lift the Outlet Valve from the base of the
tank, roll forwards and rotate so the button
end comes out first.
NOTE: Reverse procedure to reassemble.
