INVISI
™
SERIES II
INVISI
™
SERIES II
NOTE: Recommended for ADA
installations where buttons are wanted
on the accessible side of the bowl.
Access Panel Variations
1
2
3
Remote Mounting Box Kit -
237 006
11
Remote Mounting Box Kit -
237 006
Kit Includes
• Remote Mounting Box
• 2 x 4m Pneumatic Tubes
• Elevated Flush Pipe Parts
The Remote Mounting Box has
been specifically designed in
conjunction with and to facilitate
the installation of button panel sets
in remote Invisi II installations.
Remote Mounting Box
0.2" or 5mm min.
to 1.8" or 45mm max.
Wall lining thickness
Remote Installation
For installation with
button panel sets
Slide the Top Panel back and off the lid.
(This panel will no longer be required).
There are clips at each end so the Top
Panel should be carefully levered or
flexed to clear both clips.
Slide the Access Box up and off the lid.
There are clips at each end so the Top
Panel should be carefully levered or
flexed to clear both clips.
Find the Front Panel supplied loose in the
pack (This panel is slightly larger than the
Top Panel). Slide the Front Panel onto the
lid ensuring it locks into position.
Slide the Access Box onto the lid ensuring
the overhang tab is to the rear of the tank
and it locks into position.
The Panel and Access Box should lock
together neatly as shown.
Access Box with
Dust Cover
“click”
“click”
Front Cover
(supplied loose)
Top Cover
The Tank is supplied standard with Front Access.
For conversion from Front to Top Access follow this procedure.
clips
Clips
