10
STEP 3 – connEcTinG ThE waTEr SuPPlY
Flush lines, fit filter washer and
connect the flexible tails to the water
supply and tighten to compress the
sealing washer to provide a water-
tight joint.
For models with temperature control
connect the red flexible tail to the hot
water supply and the blue flexible tail to
the cold water supply.
Important:
Flexible tails must not
be kinked, twisted or in tension when
installed. (Minimum bend radius =
50mm). do not install flexible tails
where subject to ultra violet light.
2 inlETS VErSion
1 inlET VErSion
FLEX taILS
FILtER WaSHERS
ISoLatInG StoP taPS
code : 842018c
MakE SurE ThaT ThE filTEr waShEr(S) iS/arE inSTallED BETwEEn ThE
flEXiBlE Tail anD ThE iSolaTinG SToP TaP (noT SuPPliED).
2
turn on the central water supply and
the isolating stop taps and check for
leaks.
1
MIXER OR TAP
INsTAllATION
