The Remote Thermostat Comfort Control is a
touch screen control that operates either as a
remote control or a thermostat to control airflow
into a space. The Remote Thermostat is battery
powered and communicates wirelessly to the
actuator using the FCC ISM 915MHz band.
The Remote Thermostat can be placed on a table
in a space or permanently attached to a wall.
Remote Thermostat
Comfort Control
User Manual
Rev A Nov 2014
Operating Modes
In remote control mode, airflow is controlled by the user and can be adjusted from 100%, fully open, to 0%, fully closed. The user
simply pushes the UP or DOWN key to control the amount of airflow into the space.
Remote Control Mode
Linked
AM
Menu
Tu
%
Remote
Linked
AM
Menu
Tu
%
Remote
Heat
Airflow displayed
Airflow and temperature
displayed
In thermostat mode, airflow is controlled by the set point and room temperature, and whether the system is in heating or cooling. A
schedule can be programmed into the thermostat to control airflow for daytime and night time, or for days off.
Thermostat Mode
Indoors
Thermostat
o
F
Set To
Hold
AM
ed
Link
Tu
Menu
Indoors
Thermostat
Linked
Set To
AM
Day
Tu
Schedule
Menu
o
F
%
Linked
AM
Tu
Menu
Nite
Schedule
Thermostat
Hold Mode.
Thermostat controls
airflow.
Schedule Mode.
Thermostat controls
airflow and switches
between day or night
mode depending on the
schedule and the time of
day.
Night / Off Mode.
Thermostat sets the
damper to the Night
Time / Off Airflow
setting.
The Remote Thermostat can be operated in either Remote Control Mode or Thermostat Mode. For best
performance, operate in one mode - don’t repeatedly switch between modes.
Some systems may have controls that set certain limits, such as the discharge air temperature. Check with your
installer to see which mode, Remote Control or Thermostat, is best suited for your system.
Heat
Remote
Remote/Thermostat
Actuator
LED indicator
Link switch
Important!
Form 17001
