Option 1: Cleaning the Touch Screen
This option disables the touchscreen for 30 seconds to enable
you to clean the touchscreen
Press and hold the MENU key to display
Option 01.
Option
Menu
Enter
Option
Menu
Enter
o
F
Option 3: Setting discharge air
temperature for detecting heating call
Factory Default 95
Option 2: Changing the LCD Contrast
Press and hold the MENU key to display
Option 02.
Option
Menu
Enter
Factory Default 1
Option 1
Option 2
Option 3
Option 4
Option 5
Option 6
Option 7
Option 8
Cleaning the touch screen
Changing the LCD contrast
Setting discharge air temp to detect heating
Setting discharge air temp to detect cooling
Setting the night time or off airflow
Set the change in damper position per degree
Turning on temperature in the display in
Remote Control Mode
Set the minimum airflow allowed
Options and Factory Defaults
Default = Off
Default = 10
Default = 95
Default = 65
Default = 50%
Default = 10%
Default = Off
Default = 0%
Options = Off or On
Options = 1 - 10
Options = 85 - 120
Options = 60 - 75
Options = 20% - 100%
Options = 5% - 25%
Options = Off or On
Options = 0% - 50%
Options are set using the Menu key. The MENU key is also used to set the schedule.
Scroll through the options by pressing and holding the MENU. Schedule options are displayed first, then Options. Continue to
press and hold until Option 01 is displayed. Continue to press and hold MENU to see all options. Press ENTER to return to
normal operation.
The following options are available. Some options should be set by the installer and have been indicated as Installer.
Option
o
F
Option 4: Setting discharge air
temperature for detecting cooling call
Factory Default 65
Menu
Enter
User
User
Installer
Installer
User
Installer
User
Installer
If the discharge air temperature is below the default of 95 degrees, a
heating call will not be detected and the thermostat will not control
airflow properly. Use this option to lower the temperature setting
for discharge air so a heating call will be detected.
If the discharge air temperature is above the default of 65 degrees, a
cooling call will not be detected and the thermostat will not control
airflow properly. Use this option to raise the temperature setting for
discharge air so a cooling call will be detected.
6
1.
During the 30 second countdown, use a
damp, soft cloth to clean the touchscreen.
After 30 seconds, the remote thermostat
returns to normal operation.
2.
3.
Press the UP key to select On.
Press the ENTER key to start a 30 second
count down.
1.
Or press and hold MENU to save the
changes and display the next option.
2.
3.
4.
Use the UP / DOWN keys to change the
LCD contrast.
Press ENTER to save the changes and
return to normal operation.
Press and hold the MENU key to display
Option 03.
1.
Or press and hold MENU to save the
changes and display the next option.
2.
3.
4.
Use the UP / DOWN keys to change the
heating detect setpoint temperature.
Press ENTER to save the changes and
return to normal operation.
Press and hold the MENU key to display
Option 04.
1.
Or press and hold MENU to save the
changes and display the next option.
2.
3.
4.
Use the UP / DOWN keys to change the
cooling detect setpoint temperature.
Press ENTER to save the changes and
return to normal operation.
