7
Option 6: Setting the change in damper
position per degree
Factory Default 10%
%
Option
Menu
Enter
Option 5: Setting the Night or Off
Airflow
Factory Default 50%
%
Option
Menu
Enter
Option 7: Turning on Temperature
Display in Remote Control Mode
Option
Menu
Enter
Factory Default Off
Linked
AM
Menu
Tu
%
Remote
Heat
The temperature(shown in grey) is displayed
below the airflow %.
After the first command, the remote control
will display whether the system is in heating
(Heat) or in cooling (Cool). The system mode
is determined by a temperature sensor in
the actuator measuring the discharge air
temperature.
Option 8: Setting the minimum airflow
allowed.
Factory Default 0%
%
Option
Menu
Enter
This option sets the airflow during night mode or on days off.
This option sets how much the damper position will adjust for each
degree difference between room temperature and the set point
temperature.
This option displays the room temperature on the display in remote
control mode. The UP / DOWN keys are used to adjust airflow.
This option sets the minimum airflow allowed and can be used to
minimize damper noise.
Press and hold the MENU key to display
Option 05.
1.
Or press and hold MENU to save the
changes and display the next option.
2.
3.
4.
Use the UP / DOWN keys to change the
night time / off airflow.
Press ENTER to save the changes and
return to normal operation.
Press and hold the MENU key to display
Option 06.
1.
Or press and hold MENU to save the
changes and display the next option.
2.
3.
4.
Use the UP / DOWN keys to set the
change in damper position for each
degree difference between setpoint and
room temperature.
Press ENTER to save the changes and
return to normal operation.
Press and hold the MENU key to display
Option 07.
1.
Or press and hold MENU to save the
changes and display the next option.
2.
3.
4.
Use the UP / DOWN keys to turn the
option on or off.
Press ENTER to save the changes and
return to normal operation.
Press and hold the MENU key to display
Option 08.
1.
2.
3.
Use the UP / DOWN keys to set the
minimum airflow allowed.
Press ENTER to save the changes and
return to normal operation.
