![background image](http://html1.mh-extra.com/html/carmen/c83007/c83007_instructions-for-use_2559338002.webp)
Instructions for USE
BEFORE FIRST USE:
1.
Remove your appliance from the packaging.
2.
Check that there is no damage to the cord or any visible
damage to the body.
3.
Your appliance is now ready for normal use.
4.
Dispose of the packaging in a responsible manner.
5.
Before using, check the foil, cutters, trimmers and
combs for wear or damage. If the foil, cutters, trimmers
or combs show signs of wear or damage, do not use the
groomer until the damaged parts have been replaced,
as injury may occur.
Getting to Know Your 4-in-1-Lady Shaver:
Getting to Know Your 4-in-1-Lady Shaver
Keep your skin looking silky smooth for longer with the
high performance 4-in-1 Lady Shaver. Featuring a close
foil shaver, exfoliating brush, bikini trimmer and cleaning
brush attachments; you can be sure that your skin is expertly
prepared for a smooth shave in and out of the shower
thanks to its innovative waterproof design. A generous one
hour continuous running time, which ensures that you have
plenty of time to delicately work the contours of the body for
a flawless finish every time. What's more, a glowing indicator
light signals when the shaver is charging its battery, allowing
you to clearly view when the shaver is fully charged.
CHARGING THE 4-IN-1 LADY SHAVER
:
1.
This appliance can be charged with the charger or
charging stand.
2.
The appliance will not work while it is charging.
3.
Plug the charger into a mains outlet and connect it
to the appliance or the cradle. If using the cradle to
charge, place the shaver on the cradle. Charging time
is 8 hours.
4.
Plug the charger into a mains outlet and connect it to
the shaver or the charging stand. If using the stand to
charge, place the shaver on the stand.
5.
Charge the shaver for 8 hours for a full charge.
USING YOUR LADY SHAVER:
1.
Remove the protective cap from the blade, making sure
it is not damaged, to prevent injuries to the skin.
2.
Turn the shaver ON by pressing the on/ off button.
3.
Pull your skin taut, to make the hairs stand upright.
Begin by cutting longer hair and then move the shaver
forward in the opposite direction to hair growth,
pressing down gently all the while. Be careful not to
apply excessive pressure, as this could damage both
the blade and the skin.
4.
Turn off the shaver by pressing the on/off button after
you are finished.
5.
Clean the shaver head with the cleaning brush.
Cleaning and Care:
•
Always switch the shaver OFF and remove the power
cord from the charging stand or shaver and outlet
before cleaning.
•
Do not use compressed air, abrasive cleaning agents,
scourers or aggressive liquids such as gasoline, alcohol,
benzene bleach or acetone to clean the appliance.
•
This shaver is waterproof and can be washed directly
under the tap. However, users should be careful to
ensure the handle is separate from the power cord prior
to cleaning.
•
Do not wash this shaver at temperatures above 50°C,
and do not immerse it in water for prolonged periods
of time.
•
Never press down on the razor mesh, as this may
damage it.
•
Only use the cleaning brush supplied. Any other brush
may cause damage.
Cleaning the shaving unit:
•
Always switch the groomer off and remove the power
cord from the outlet before cleaning.
•
Remove the shaving blade from the shaver by pressing
the button on its side.
•
Rinse the shaving blade under warm running tap water
to remove debris.
•
Clean the hair chamber with the cleaning brush, or
rinse under warm running tap water to remove any
residual debris.
•
Do not use a towel or cloth to dry the shaving foil or
cutters, as this may cause damage; allow to air dry
thoroughly.
•
For better performance, apply lubricant oil to the
shaving blade after every use.
CAUTION: Do not press the razor mesh with your hand to
prevent damage.
Replacing the shaving head:
•
If the shaving foil and cutters are worn or damaged, do
not continue using the shaver. Replace the shaving foil
and cutters immediately.
•
It is recommended that your replace your shaving foil
and cutter once every 1-2 years.
•
The foil is a precision part. Handle with care.
1.
Always switch the shaver OFF and remove it from the
charging stand before replacing the shaving blade.
2.
Remove the shaving blade by pulling it off the appliance
3.
Place the new shaving head on the groomer by snapping
it into place. You will hear a “click”.
4.
After replacing the shaving head, check that the shaving
head is firmly attached before using the shaver.
SAMANTHA’S TIPS FOR A SMOOTHER SHAVE
Giving Your Legs a Dry Shave:
1.
Make sure your legs are washed with warm water and
a gentle cleanser. It’s important to wash and dry your
skin before shaving so the hair softens, making it easier
to shave.
2.
Ensure that your skin is free of any oils or dirt.
3.
To avoid goose bumps keep your skin warm.
4.
The 4-in1 Lady Shaver must be clean before you begin
shaving.
1.
When you begin shaving, move the shaver in gentle
circular movements upward from your ankle to the
thigh. Do not apply excessive pressure to your skin.
Remember to take your time, especially in sensitive
areas of your skin.
2.
For a closer shave, carefully shave against the direction
of hair growth.
3.
Be very careful when shaving around bony areas of your
skin like your ankles, shins and knees.
4.
When finished rinse or wipe your skin with a clean cloth.
5.
We recommend moisturising your skin to keep it from
becoming dry.
© 2018 Samantha Faiers. Managed by AM Concepts UK. Licensed by RMI.
FREE
EXTEND YOUR
GUARANTEE ONLINE
*
Extended 3 Year Guarantee,
when you register online at:
*Subject to T&Cs - available online
www.carmenonline.co