Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
14
SPEEDCHECK-15/18 USER MANUAL
3.0 COMPONENTS AND PREPARATION
3.3 Tools Required
The following tools may be required to mount your SpeedCheck radar speed sign, depending on the model and
configuration:
a. Imperial socket set
b. Crescent wrench
c. Tap set
d. Imperial Allen-Wrench set
e. Fish tape
f.
Level
g. Compass or pre-determined equatorial
direction
h. Banding installation tool
i.
Drill and drill bits
j.
Fine tip felt marker
k. Multi-bit screwdriver
l.
Pelco Roger-Wrench (signal head beacons)
m. Hook spanner wrench, 1-
1/2” trade size
(some configurations)
n. Ladder or lift device
o. Lithium grease
3.4 Banding Recommendations
90 MPH Wind Loading
3/4” x 0.030” band
Single wrap provides adequate strength for 90 MPH wind loading.
5/8
” x 0.030” band
Single wrap provides adequate strength for 90 MPH wind loading.
1/2
” x 0.030” band
Single wrap provides adequate strength for 90 MPH wind loading.
However, double wrap is preferred on upper mounting bracket to
prevent rotational slippage.
Banding provides the most secure and vandal-resistant mounting. If banding is not available,
U-bolts can be used for most applications.