Carmanah M850 & M860 Self-Contained LED Lantern Instructions
v1.
1
Jan
201
6
21
District
Recharge Interval
(Years)
D1
8
D5 (VA north)
7
D5 (NC)
6
D7 (SC & GA)
5
D7 (FL & PR)
4
D8 (FL, MS, AL & LA)
5
D8 (TX)
4
D8 (rivers - Cairo south)
6
D8 (rivers - Cairo north)
7
D9
8
D11 (southern CA)
6
D11 (northern CA)
7
D13
9
D14
4
D17
10
Lantern Service Life
The lantern can be kept in service as long as it provides an acceptable signal.
Battery Tracking
Batteries shall be tracked and Battery Tracking Labels shall be affixed to the base of the lantern.
Remove any dirt, oil, and/or grease from the lantern’s base before applying the tracking label to
ensure maximum adhesion since it will be exposed to the environment. When the battery is
replaced, remove the label (if possible) and attach it to the battery to track it through disposal. If
the label is destroyed, write down the battery tracking number on the battery after it is removed
from the lantern. Attach a new label to the lantern when a new battery is installed.
Troubleshooting
Symptom: Lantern will not respond to the remote (or no connection to remote).
Have you removed the battery protector tab from your remote programmer?
It’s possible that the batteries in the remote are dead or the remote is not functioning.
Change the batteries in the remote. If that doesn’t work, try another remote.
The lantern searches for an IR signal on a 0.5 second cycle. The lantern’s search signal may
not coincide with the push of the power button. Try pressing the power button quickly and
repeatedly.
Is lantern still in factory mode? Use tap-to-activate and look for factory storage mode (
Stor)
.
If so, wait two hours and the lantern should respond to the IR programmer as normal.
All manuals and user guides at all-guides.com
all-guides.com
