background image

PRELIMINARY RELEASE 

*** This is a confidential document. Do not distribute. *** 

 

REGULATORY SPECIFICATIONS 

 

ACP and Spectrum Mask 

Meets FCC and Ofcom specifications  
-55 dBr +/- 3 MHz relative to 12.2 dBm 
(measured at 100 KHz increments) 

 
ENVIRONMENTAL SPECIFICATIONS 

Operating Temperature -30° to 55° C 

Operating Humidity 

Up to 95%, non-condensing 

Shock and Vibration 

MIL-STD-810 

 
SECURITY 

 

Security Mechanism 

WPA2/AES-128 bit shared secret key 

 
BASESTATION 

 

Antenna System 

SISO with MIMO Space Diversity option 

Antenna Connector 

“F” type female 75 Ohms 

 
MECHANICAL SPECIFICATIONS 

 

Unit Dimensions  

19.6” x 6” x 1.75” 

Enclosure Material  

Painted steel 

Weight  

5 lbs 

Mounting  

19 inch EIA 2 unit rack 

 
POWER - INDOOR RACK MOUNT   

 

Voltage  

100-240 VAC, 50-60 Hz or 12 VDC 

Current  

Tx: 30W, Rx: 15W, Idle: 13W  

Connector  

POE 

 

6.2.

 

Warranty 

Carlson Wireless Technologies, Inc. or Carlson Wireless USA, collectively referred to as 
“Carlson“), will repair this product with new or rebuilt parts, free of charge, in the USA or Puerto 
Rico for one (1) year from the date of original purchase in the event of a defect in material or 
workmanship. You can obtain mail-in service in the USA during the warranty period from a 
Carlson Factory Service Center by visiting 

http://www.carlsonwireless.com/support/rma-

request.html

 for an RMA (Return Materials Authorization) number. After receiving your RMA 

number, ship your product adequately packed, postage paid and insured to the address 
provided. This warranty extends to the original purchaser only. A purchase receipt or other proof 
of the date of original purchase will be required before the rendering of warranty services. This 
warranty only covers failures due to defects in materials or workmanship, which occur during 
normal use. It does not cover damages incurred in shipment or failures caused by products not 
supplied by Carlson. It also does not cover failures which result from accident, misuse, abuse, 
neglect, mishandling, misapplication, alteration, modification, lightning, power line surge, 
introduction of sand, dust, humidity and/or liquids, or service by anyone other than a Carlson 
Factory Service Center or authorized Carlson Service Center, or damage that is attributable to 
acts of God. 
Limits and Exclusions 
There are no express warranties except as listed above. 

Page | 27 

 

Summary of Contents for RuralConnect
































Reviews: