BT2 Quick start operational guide
P a g e |
6
3 Connection
Carlson Boretrak automatically starts searching for your probe.
If no connection is made, check:
•
The Boretrak2 probe is powered ON and flashing red or blue.
•
The Boretrak2 is paired to your tablet.
•
Bluetooth on your tablet is switched ON.
•
No other devices are connected to the same Boretrak2 probe.
Tap
Find Boretraks
to reattempt a connection.
If you have not imported any holes into the project, a
Hole Setup
dialog appears.
If required, enter hole
coordinates and planned
hole details. Then tap
Finish
.
