BT2 Quick start operation guide
P a g e |
2
1 Preparation
•
You are running the most recent release of
Carlson Boretrak
, available from Carlson’s
website.
•
The Bluetooth function on your tablet is turned ON and the Boretrak2 probe is paired with
your tablet.
•
The supplied, rechargeable Boretrak2 batteries are fully charged.
•
The probe, thread, batteries and deployment device are all inspected and found to be in
good condition and free from damage.
Load the batteries into the Boretrak2 nose cone and screw the nose cone securely onto the
probe. The Boretrak2 is now ON.
The probe LEDs start by showing solid yellow while the power is stabilising. They progress
to flashing blue if there has been no Bluetooth connection, or flashing red if there has been
a Bluetooth connection.
Set out the alignment jig in a known heading and in a position that will be convenient for your
deployment. The accuracy of the alignment heading determines the accuracy of the whole
survey until the next alignment, so take great care when setting out the jig.
Open
Carlson Boretrak
.
