▲
▲
46
Outputs / Other settings
Diagnostic
41
Installed power
44
48
55
The meaning of the symbols on the display is the following:
OUT C0 (1): digital output SLOT C0, channel 1
OUT C1 (2): digital output SLOT C1, channel 2
OUT D0 (3): digital output SLOT D0, channel 3
OUT D1 (4): digital output SLOT D1, channel 4
❑
Pulse output
This function allows the user
to set the parameters of the
pulse output. The output can be
connected to a specific energy
and this energy can be connect-
ed to the desired tariff. The
measured energy is re-transmit-
ted by means of the pulse output
(the pulses/energy ratio of which
is programmable). Use
and
to select PULSE from the list
of available outputs; then con-
firm with
and choose from
the submenu ENERGY TYPE the
energy to be retransmitted using
and
: consumed active
energy (kWh +), generated active
energy (kWh -), consumed reac-
tive energy (kvarh +), generated
▼
▲
S
▼
▲
F
F
F
F
S
▼
▲
S
▼
▲
S
▼
▲
▼
▲
S
▼
▲
S
S
1.2..
..2.1
reactive energy (kvarh -), press the
key to open the
menu of energy/pulse output management. There are five
possible selections: TOTAL, output connected to the total
energy meter; TARIFF, output connected to the desired tariff
S
