▲
▲
18
Programming
A3-C3 Inputs
13
Load profiles
17
20
33
■
Change Password
This function allows you to
choose the desired password
value (from 0 to 500).
Press the
key and when the
new password value is required,
enter the desired value by means
of
the and keys;
then
press the
key to confirm the
new value.
The instrument goes back to the
main menu, as shown in the fig-
ure on the left. To reset your
choices and go back to the main
menu press
.
F
S
▼
▲
S
F
F
S
S
▼
▲
1.2..
..2.1
Measure
S
F
S
F
■
Inputs
Depending on the hardware
configuration being used, the
instrument works in two different
operating modes:
❑
With installed analogue meas-
uring input module (AQ1018-
AQ1019)
.
The instrument carries out all
the measures of: instantaneous,
power, THD variables and ener-
gy metering. It’s also possible to
select the gas and water meter-
ing, as well as gas and night tar-
