manualshive.com logo in svg

CARLO GAVAZZI RVDFA110020, Advanced User'S Manual

Share
Download
CARLO GAVAZZI RVDFA110020 Advanced User'S Manual Download Page 9

8

Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 23/03/2011

2.1 Environment

Chapter 2:
Ambient Environment and Installation

The installation site of the inverter is very important. It relates directly to the functionality and
the life span of your inverter. Please carefully choose the installation site to meet the following
requirements:

• Mount the unit vertically
• Environment temperature: -10°C ~ +40°C (without shield sticker: -10°C ~ +50°C)
• Avoid placing close to any heating equipment
• Avoid water dripping or humid environment
• Avoid direct sunlight
• Avoid oil or salty corrosive gas
• Avoid contacting corrosive liquid or gas
• Prevent foreign dusts, flocks, or metal scraps from entering interior
• Avoid electric-magnetic interference (soldering or power machinery)
• Avoid vibration, if vibration cannot be avoided, an anti-rattle mounting device should be

installed to reduce vibration.

• If the inverter is installed in an enclosed control panel, please remove the shield sticker

located at the top of the inverter. This will allow additional airflow and cooling.

• For proper Installation of the inverter you must place the front side of the inverter facing

front and the top of the inverter in the up direction for better heat dissipation.

• Installation must be compliant to the following requirements.

(Incorrect configuration)

(Correct configuration)

(Incorrect configuration)

(Correct configuration)

Air exchanging fan

Air exchanging fan

Inside the power

distributor

Inside the

power

distributor

Inside

the

power

distribut

or

12cm/4.72

”

12cm/4.72

”

5cm/1.97

”

5cm/1.97

”

5cm/1.97

”

Air convection -10°C...+40°C

(a) Front view

(b) Side view

RVDF Advanced User Manual

Summary of Contents for RVDFA110020




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands