NOTE
Excessive amounts of current produces
orange peel.
0
10
20
30
60
70
100
40 50
80
90
kV
+
–
0
0
10
20
30
60
70
100
40 50
80
90
µA
+
–
0
ELECTRICAL SETTINGS
Setting The High Voltage
With this control, the high voltage of the gun can be adjusted.
Depending on the powder, charging is set between 40 kV
to 80 kV. Standard powder can be set with approximately
70 kV. Metallic powders are set about 50 - 60 kV.
Setting The Current Control
The current regulation has a great influence on the charge of
the powder. As a rule, little electricity is used. Approximately
20 µA. In weakly chargeable powder, the amount of current
must be set higher. In case of applying a second or over
coat or MDF coating, the amount of current can be set low:
approximately 6-8 µA.
PA-17-05-R1 (04/2018)
14 / 34
EN
USING “SOFT” CONTROLS
www.carlisleft.com