Carlisle ms 8160 Series Service Manual Download Page 2

CONTENTS

SAFETY:  

3-7

 

Safety Precautions

  .................................................................................................................................................... 3

 

Hazards / Safeguards

  ................................................................................................................................................ 4

PRODUCT OVERVIEW:  

8-11

 

MS Reciprocator MSR Lengths

  ................................................................................................................................. 8

 

Specifications

  ...........................................................................................................................................................11

INSTALLATION:  

12

 

Transportation of the Reciprocator

 ........................................................................................................................... 12

 

Assembling Reciprocator Onto Base

  ...................................................................................................................... 12

OPERATION:  

13-15

 

Control Box

  .............................................................................................................................................................. 13

 

Electrical Schematic - Siemens

  ............................................................................................................................... 14

 

Electrical Schematic - Allen Bradley

  ........................................................................................................................ 15

MAINTENANCE:  

16-18

 

Maintenance Schedule

  ............................................................................................................................................ 16

 

Control Box Filter Inspection

  ................................................................................................................................... 16

 

Areas to Clean and Inspect

  ..................................................................................................................................... 18

 

General Fastener Torque Reference Guide

  ............................................................................................................ 18

PARTS IDENTIFICATION:  

19-28

 

MS Reciprocator MSR

  ............................................................................................................................................. 19

 

MSR Bearing Bracket Assembly

 .............................................................................................................................. 20

 

MSR Weight Truck Assembly

  .................................................................................................................................. 21

 

MSR Motor 1000-3000

 ............................................................................................................................................. 22

 

MSR End Stop Assembly

  ........................................................................................................................................ 23

 

MSR Motor 1000-3000

  ............................................................................................................................................ 24

 

MSR Pulley Bracket Assembly 1000-3000

 ............................................................................................................... 25

 

MSR Toothed Belt

 ..................................................................................................................................................... 26

 

MSR Set Dirt Guard

 ................................................................................................................................................. 26

 

MSR Track Roller Profile

 .......................................................................................................................................... 26

 

MSR Motor Cover Hood

 ........................................................................................................................................... 26

 

MSR Guide Profile

 .................................................................................................................................................... 27

 

MSR Rear Cover Plate

 ............................................................................................................................................. 27

 

MSR Holder

 .............................................................................................................................................................. 27

 

Recommended Spare Parts

 ..................................................................................................................................... 28

PA-19-04-R0  (02/2019)

2 / 29

www.carlisleft.com

CONTENTS

EN

Summary of Contents for ms 8160 Series






























Reviews: