Service Manual
19
MEASURING POINTS PHOTOCELLS
Label photocell transmission
Measuring point
electronics CPU
Description
Correct value
Notes
ST14 PIN1
VCC
5V
ST14 PIN2
LABEL
depends on the used labels
and the selected power of
the sending diode
ST14 PIN3
PULLUP
current of sending diode
the higher the tension the
higher the power of diode
ST14 PIN4
GND
0V
The label photocell transmission notes the label length and controls the labels during the printing
corresponding to the transmission principle. The labels must have gaps between the labels and the
gaps have to be different from the label.
The level of the label is set by the potentiometer P1. The measured label of the photocell is indicated
in the service functions menu ('DLS'). The setting of label level has to be > 3V (e.g. 0,3 onto the
supporting paper and 3,5V onto the label). As the smallest value it is possible to use a level of 1V.
Label photocell reflexion
Measuring point
electronics CPU
Bezeichnung
Sollwert
Bemerkung
ST7 PIN1
VCC
5V
ST7 PIN2
LABELREFLEXION
depends on the used labels
and the selected power of the
sending diode
ST7 PIN3
PULLUP
current of sending diode
the higher the tension the
higher the power of diode
ST7 PIN4
GND
0V
The label photocell transmission notes the label length and controls the labels during the printing
corresponding to the reflexion principle. The labels have to be white (reflecting). The marking which
separates the labels has to be black matt (not reflecting).
The level of the label is set by the potentiometer P2. The measured value of the photocell is indicated
in the service functions menu ('RLS'). The setting of label level has to be > 2,5V (e.g.1V).
Summary of Contents for Vario II series
