23
KOHJ-H-15-EN1-1.0-15102021
5. Operation
5.1 Turning on the controller and activating Normal operation
Normal
operation is intended for patients with very high or high risk of pressure ulcer
who may lie on their back or side.
Whenever the controller is turned on, it will start in
Normal
operation. There is no time
limit for this function.
Only healthcare professionals can assess the need for and suitabili-
ty of a mattress system in the treatment situation.
Before placing the patient on the mattress, start the device as de-
scribed in section 5.1, and allow the mattress system to adjust to
Normal
function successfully, so that all green LEDs are lit in the
centre of the LED light bar.
The dimensions of the mattress should always fit to the size of the
patient, such that the pressure in all the adjustment sections are
optimally placed to be regulated by the controller in correspond-
ence to the patient’s body parts.
Make sure that the controller is con-
nected according to the instructions in
the section 4.3 Commissioning the con-
troller, and check the required things
before use.
To turn on the controller, press down
the device standby button briefly.
The device prompts you to consult the
quick guide that can be found on the re-
movable tray behind the device.
The mattress system is set to
Normal
operation.
The device will first adjust the foot re
-
gion, then the head and finally the tor
-
so. If
Normal
operation is selected later
after startup, the device will first adjust
the torso, followed by the foot region
and the head.
The LED light bars for the cells will rise
up or fall down with the adjustment of
the cells.
Note: See the
removable quick
guide on the back
- Normal -
Adjusting
