background image

27

KOHJ-H-15-EN1-1.0-15102021

5.6 Supine operation

Supine

 operation is used only for the treatment of immobile patients on horizontal po

-

sition, lying on their backs. The mattress system adjusts to the lowest possible pressure 

setting, which achieves the best possible therapeutic level.

Supine

 operation is used only for the treatment of immobile pa-

tients on horizontal position, lying on their backs. Selecting 

Supine

 

operation in other treatment positions will increase the risk of 

pressure ulcers. Make sure the patient is lying horizontally on their 

back when selecting this function.

With the device in operation, press the 

Supine 

operation button to activate the 

function. 

The device activates 

Supine

 operation. 

The  device  will  first  adjust  the  torso, 

then the foot region and finally the head.

The operation LED is lit and the cell LEDs 

will go down. 

The device has activated 

Supine

 opera-

tion.

The operation LED is lit and the cell LEDs 

are lit on the centre row.

5.7 Keypad lock

The controller’s keypad can be locked if deemed necessary considering the conditions of 

the operating environment.

To lock the keys of the controller, press 

and hold down the keypad lock button 

for three (3) seconds while the device is 

running.

Keypad locking is indicated on the device 

screen. The LED on the keypad lock turns 

on.

- Supine - 

Adjusting

- Supine - 

OK

3 s.

Keypad locked

 -

Summary of Contents for OptimaCot

















































Reviews: