Carilex Cari Chair Operation Manual Download Page 12

ANTI-DECUBITUS AIR ALTERNATING PRESSURE CUSHION REPLACEMENT SYSTEM

11

English

14.0 Technical Data

Air flow rate of power unit 

Open flow 2.5 liters/min

Power Input:  

AC 100-240V - 50/60Hz (for Adapter)

Power Output  

DC 9.1V 3.33A or DC 9V 3A (for Adapter)

Power Adaptor  

GlobalTek, Inc. GTM91120-3010.5-1.4-FW
SINPRO HPU32A-104

Power Consumption  

Max: 27W (with charger)
Max.9W (without charger)

Operation mode

Geri Chair Mode & Seating Cushion Mode

Rechargeable battery

Lithium-ion Capacity: 4400mAh 
Charging Time: 4hrs 
Using Time: approx.12 hours
Typical operation time (charge & discharge cycle): 300 
times

Dimensions (WxHxD)

9.6 x 6.1 x 2.4 inch / 24.5 x 15.5 x 6.1 cm

Weight (basic unit)

2.03lb / 0.92kg

Geri Chair Cushion Set :

Cushion dimension : 70.9 x 19.7 x 5.5 in / 180 x 50 x 14 
cm
26 air cells, 70D nylon with TPU lamination.
Coverlet: Two way stretch – 40% polyurethane, 60% 
polyester.

Wheel Chair Cushion Set :

Cushion dimension :17.7 x 17.7 x 3.5 in / 45 x 45 x 9 cm
10 air cells, 210D nylon with TPU lamination.
Coverlet: Two way stretch –40% polyurethane, 60% 
polyester.

MobiCare Cushion Set :

Cushion dimension :17.7 x 17.7 x 3.5 in / 45 x 45 x 9 cm 
(with foam base)
10 air cells, 210D nylon with TPU lamination.
Coverlet: Two way stretch –40% polyurethane, 60% 
polyester.
Cushion foam base: PU foam.

IP22

Against ingress of solid foreign objects 
12.5 mm diameter. 

Against direct sprays of water up to 15˚ from the vertical

Protection class according to IEC60601-1 Class II

Operation Conditions

Temperature range: 5˚C(41˚F) to 40˚C(104˚F) 

Relative Humidity Range: 15%~60% noncondensing.
Atmosphere range: 700hPa-1060hPa

Transport and storage conditions 

Temperature Range: -25˚C (-13˚F) to 70˚C(158˚F) 

Relative Humidity Range: 0%~93% noncondensing

Summary of Contents for Cari Chair















Reviews: