Caretero Sport Classic, User Manual

Page: 19 / 28

11 REMOVING THE UPHOLSTERY
18
10 INSTALLATION FOR GROUP II (15-25 KG)
Before the installation, remove the 5-point seat belts (see point 9) and all reducer cushions ( F-1 ).
Put the seat forward facing on a passenger seat and push it firmly against the backrest. Place the child in the seat.
Pull the car belt in front of the seat and place the shoulder part of the belt in the upper belt guide on the side of the
car belt tensioner. Place the lap belt on the lower belt guide on the side of the car belt tensioner (
F-2 ).
Push the car belt tongue through the slot on the side of the seat shell and put the belt tongue in the belt buckle until
you hear the ‘click’ (
F-3 ).
Tighten the car belts by pulling the shoulder belt in the direction of the car belt tensioner ( F-4 ).
Loosen the shoulder belts by pressing the button in the front part of the seat and pulling both shoulder belts (see
C-2 ).
Adjust the seat tilt position to maximally inclined ( A-1 , see point 8). Unfasten and remove the linking rod from the seat
shell ( A-2 ). Push the seat forwards (see point A-3 ).
Remove the 5-point belts as described in point „REMOVING THE 5-POINT SEAT BELTS”.
Unfasten the screws that hold the lap belt guides with a cross-headed screwdriver ( G-1 ). Only now will it be possible
to remove the upholstery.
Unfasten the upholstery from all the fixing points on the seat shell ( G-2, G-3 ).
To install the upholstery, follow the above steps in reversed order.
12 CLEANING AND MAINTENANCE
Proper functioning of the 5-point belt buckle has a great impact on the safety of your child. The most common cause of
buckle malfunctioning is dust and dirt getting into the buckle slot. This gives the following signs:
• the belt tongue exits the buckle slot very slowly after the red button is pressed
• the belt tongue does not fix in the buckle (it slides back out)
• the belt tongue can be fastened but no ‘click’ sound can be heard
• it is necessary to put much force into closing the buckle
• it is necessary to put much force into pressing the button and releasing the tongue from the buckle
If any of the problems mentioned above occur, it is required to clean the belt buckle:
1.
Unfasten the belts (press the red button on the buckle).
2.
Remove the crotch pad.
3.
Adjust the seat tilt into the most reclining position.
4.
Thread the metal plate fixing the buckle strap through the slot in the seat shell (from the bottom upwards).
5.
Put the belt buckle into warm water with addition of few drops of dishwashing liquid for at least an hour.
Rinse the buckle with clean water and leave it until it is completely dry.
Remember to ONLY use the original upholstery for the Caretero Sport Classic seat, as it is an integral part of the
seat and plays an important role in its proper functioning.
The upholstery may be removed for washing (hand wash or machine wash - delicate fabrics programme, max 30°C).
Do not tumble dry. Use only mild detergents.
Plastic parts of the seat may be cleaned with a damp cloth with addition of soap.
Never use strong detergenst such as bleaches etc.
Never iron the uphostery.