3
1: Introduction
Wooffy will help you to find out the current state of charge of a battery or
rechargeable battery. You will get the feedback of the battery statur either
acoustic signals or vibrations.
2: Description of the Device
Put Wooffy in front of you, so that the loudspeaker grill, located on the surface
of the device, as well as the wire with one of the contacts, is facing away from
you. Right underneath the loudspeaker, you can feel one big metal button.
Together with the contact on the cable, this button is used for the measurement
of all kind of 1.5 V batterie. On the back side of the device you will find two
(embedded) contacts, which are used for the measurement of 9V-batteries.
Underneath these two embedded contacts, is the lid of the battery
compartment, with a latch and two tactile markings (dot and ring), to insert the
two 1.5V Micro batteries correctly.
3: How to Use
The big metal button is used for testing 1,5-V-batteries: put the minus pole of
the battery (the flat end) onto this contact then take the little contact, fixed to
the battery tester on a wire, and put the metal top in contact with the plus pole.
The device turns itself on and you will hear/feel the result.
On the rear side of the device you find two embedded contacts, which are
needed for testing 9V-batteries. Put the plus and minus pole of the battery onto
these contacts, the device turns itself on and you will hear/feel the result.
Consult instructions before use!
Do not operate Wooffy
without reading the instruction manual. Get acquainted with
the device and all the accessories. Keep the instruction for
reference reading and pass it on with the device.
