Overview
1–6
AA2204_en | 2012-07-27
Automatic Image Quality and Processing
An internal densitometer enables the imager to automatically adjust image processing
parameters using Automatic Image Quality Control (AIQC) to produce an optimal image.
The imager adjusts these parameters each time it prints a calibration film.
A calibration film is printed when:
•
A film cartridge is inserted in the imager with film of a new lot number.
•
You request a calibration film at the display screen or the Web Portal.
•
A film cartridge is inserted into the imager for which a current calibration is not
stored.
Related topics
Calibrate the Imager for the Loaded Film
Configure and Monitor the System (Using the Web
Portal)
The Web Portal is your interface to additional features. In addition to the installation and
setup of your system, you can view and manage the imager's connections over the
network, configure features, view error messages, and access general status information
at the Web Portal. You can also check film count, film size, and film type.
Related topics
Enhanced Serviceability with Remote Monitoring
Remote Management Services is set up through the Web Portal, and is designed to
enhance efficient system serviceability and simplify analytical and service processes
through the monitoring of your equipment. Additionally, this simplifies the service
process by providing qualified service personnel with faster, easier, and more complete
access to the operational history of each system.
Remote Management Services provides the following for the imager:
•
Ability to monitor and diagnose error conditions without introducing “downtime”
•
Firewall-safe, Internet transmission of machine data, while complying with patient
confidentiality regulations
•
Minimal effort to set up communication
•
Flexibility to facilitate specific configurations at each site
Agency Compliance
See the Safety Manual.
SHORT TERM CONFIDENTIAL
