CS 8100SC Family User Guide (SM987)_Ed 01
49
7
Troubleshooting
Quick Troubleshooting
Occasionally, malfunctions can occur during use in the event of an incorrect action. An error
message is displayed on the popup on the
Acquisition
interface
System Status Screen
.
The following table lists the information messages, their description and the action to take:
Table 3
Error Code Message
Table 4
Information messages
IMPORTANT
If an Error Code message is displayed, the malfunction
persists or more serious conditions occur, contact a qualified
technician. When you call the qualified technician have the
following information ready:
•
Model Serial Number
•
Error Code Message
Error Code
Error Message
Description
Action
Err_S_8100_CJ848_GENERATOR_36865
Handswitch was
released before the
end of exposure.
The user has
released the
exposure button
prematurely.
Relaunch the acquisition
and hold the exposure
button until the end of the
acquisition cycle.
Message
Description
Action
X-ray tube cooling
Cooling in progress.
Wait until the
Generator Cooling
Indicator
on
the
Acquisition
interface reaches zero.
Thermal security
Cooling in progress.
Wait until the
Generator Cooling
Indicator
on
the
Acquisition
interface reaches zero.
Release handswitch
The acquisition has ended.
Release the exposure button of the X-ray
remote control.
Start the acquisition
The acquisition has been
launched.
Keep pressing and holding the exposure button.
Upgrade of the firmware
The system is being upgraded.
Wait for completion of the upgrade.
I 9
The Cephalometric sensor is in
the cooling process.
Wait until the
Ready
Indicator
LED
is green.
I 5
The position of the head clamps
do not match the selected exam
program.
Position the head clamps manually for the
selected exam.
I 17
The sensor is in the positioning
process for either panoramic, 3D
or Ceph mode.
Wait for the end of the positioning process.
Summary of Contents for CS 8100SC Access
