Acquiring a 3D Multi-Volume Image (Stitching) for Adult and Pediatric Patients
5–14
ACQUIRING IMAGES
5. Select the following regions of interest according to the desired exam:
•
Full arch (by default), covering a zone of
±
7cm (depth) x
±
8 cm (Width):
•
Anterior posterior right:
•
Anterior posterior left:
6. Click
to initialize the rotative arm position for the multi-volume.
7.
Position the 3D bite block support and 3D bite block with the patient’s bite
registration.
8. Press and hold
to raise the chin rest to the following positioning indicators:
•
For an upper jaw positioning
•
For a lower jaw positioning
9. Click
on the
Control Panel
to turn on the positioning laser beams. Adjust the
bite registration with the FoV laser.
Summary of Contents for CS 9000
