Carel ultimateSAM SA 2 Series, User Manual

Page: 7 / 62

7
ENG
“ultimateSAM - user” +03U0070EF - rel. 2.0 - 20150301
1.1 ultimateSAM Humidification System
(SA*)
Each UltimateSAM Humidification System consists of the following:
•
humidifier steam distributor;
•
Components for pressurized steam, such as: actuators, valves, strainers
and steam traps (sold separately);
•
a controlling humidistat and/or sensor (sold separately);
•
a steam control valve & actuator for use with pressurized steam sources
(sold separately);
•
other optional equipment that may be required.
1.2 Distributor dimensions and weights
1.2.1 Dimensions and weights of the SAB* / SAT* and
distributors
" X "
" Y "
Fig. 1.a
The system for identifying the humidifier steam distributor is shown in
Table 1.b. The table also provides the width (Dimension “X”) and height
(Dimension “Y”). The front-to-back depth of all distributor is the same,
133mm (5.25”). NOTE: The height dimension assumes that the bottom
pedestals are in the factory-assembled position (see section 1.4 for details
on other pedestal heights).
The weights of the various distributor configurations, including the frame,
are shown on Table 1.a. The table shows weights for only the smallest and
largest width and height distributors. A complete weight table for all width
and height codes can be found in the “Technical specifications” manual.
Weight in kg (lb)
Height Code
A Q
SABA*SI3*0 7.5 ( 17) 21.0 ( 46)
SABA*LI3*0 8.0 ( 18) 22.5 ( 50)
SABA*HI3*0 8.5 ( 19) 25.5 ( 56)
SABR*SI3*0 44.0 ( 97) 126.0 (277)
SABR*LI3*0 46.0 (101) 139.5 (307)
SABR*HI3*0 47.5 (105) 202.5 (446)
SATA*SI3*0 10.0 ( 22) 23.0 ( 51)
SATA*LI3*0 10.0 ( 22) 24.5 ( 54)
SATA*H3*0 10.5 ( 23) 28.0 ( 62)
SATR*SI3*0 55.0 (121) 137.0 (301)
SATR*LI3*0 56.5 (124) 150.0 (330)
SATR*H3*0 58.5 (129) 213.5 (470)
Tab. 1.a
1. INTRODUCTION AND ASSEMBLY
2
SA x
1 3
x
4
x
5
x
6
x
7
x
8
x
9
0

ID prefix

Feed type: B= Bottom feed
T=Top feed

Width Code Dimension
“X” mm (in)
No. of uprights
152mm
(6”) spacing
76mm
(3”) spacing
A= 447 (17.75) 2 3
B= 599 (23.75) 3 5
C= 751 (29.75) 4 7
D= 903 (35.75) 5 9
E= 1055 (41.75) 6 11
F= 1207 (47.75) 7 13
G= 1359 (53.75) 8 15
H= 1511 (59.50) 9 17
I= 1663 (65.50) 10 19
J= 1815 (71.50) 11 21
K= 1967 (77.50) 12 23
L= 2119 (83.50) 13 25
M= 2271 (89.50) 14 27
N= 2423 (95.50) 15 29
O= 2575 (101.50) 16 31
P= 2727 (107.50) 17 33
Q= 2879 (113.50) 18 35
R= 3031 (119.50) 19 37

Height: Code Dimension “Y” mm (in)
Botom feed Top feed
A= 598 ( 23.75) 749 ( 29.50)
B= 750 ( 29.75) 901 ( 35.50)
C= 902 ( 35.75) 1053 ( 41.50)
D= 1054 ( 41.50) 1205 ( 47.50)
E= 1206 ( 47.50) 1357 ( 53.50)
F= 1358 ( 53.50) 1509 ( 59.50)
G= 1510 ( 59.50) 1661 ( 65.50)
H= 1662 ( 65.50) 1813 ( 71.50)
I= 1814 ( 71.50) 1965 ( 77.50)
J= 1966 ( 77.50) 2117 ( 83.50)
K= 2118 ( 83.50) 2269 ( 89.50)
L= 2270 ( 89.50) 2421 ( 95.50)
M= 2422 ( 95.50) 2573 (101.50)
N= 2574 (101.50) 2725 (107.50)
O= 2726 (107.50) 2877 (113.50)
P= 2878 (113.50) 3029 (119.50)
Q= 3030 (119.50) 3181 (125.25)

Uprights: Code Interasse
mm (in)”
OD mm (in)
S= 152 (6.00) 35 (1.50)
L= 152 (6.00) 45 (1.75)
H= 76 (3.00) 35 (1.50)
 Insulation: I= insulated uprights with nozzles
N= uninsulated uprights without nozzles

Frame: 0= no frame, unassembled
1= no frame, assembled
2= with frame, unassembled
3= with frame, assembled

Drain: U= ¾” Male NPT (only for North America)
0= ¾” Male Gas

--- ---
Tab. 1.b
For additional dimensions regarding features on the distributor, like drain
locations, see the “Technical specifications” manual. See other sections of
this manual for details on other ultimateSAM items, such as valves and traps.
Note : some models/versions are specific for certain markets, and
consequently are not available in some countries. The flanged
accessories are not available for North America. Contact the CAREL sales
network for availability.