Carel MCmultizone, User Manual

Page: 19 / 52

19
ENG
“MCmultizone” +030221981 - rel. 2.3 - 09.12.2014
cabinet
distribution
maint
enanc
e
5. STARTING AND USER INTERFACE
Before starting the humidifi er, check:
water and air connections (chap. 2). In the event of water leaks do not
start the humidifi er before having resolved the problem;
electrical connections (chap. 3)
5.1 Starting
1
0
ON
5.2 Stopping
1
0
OFF
Note : if the system is stopped for an extended time, open the
valve at the end of the water line to assist drainage. If the system
is fi tted with drain solenoid valves at the end of the line (optional), this is
done automatically.
5.3 First start-up (setting the language)
On power-up, the following screen is displayed:
Select language:
1. English
2. Italiano
3. Deutsch
4. Francais
5. Espaniol
Press ENTER to go the list of languages, then UP to select the desired
language and ENTER to confi rm. This screen remains displayed for 60
seconds.
Subsequently, the following screen will be displayed:
Show language mask at unit start-up Yes/No
•
YES: the screen for choosing the language will be displayed when the
humidifi er is started the next time;
•
NO: the screen for choosing the language will no longer be displayed
on power-up.
Note: The language can also be changed from the maintenance
menu (maintenance menu > system info > language).
5.4 Keypad
6
4
5
3
2
1
button function
(1) alarm list active alarms and reset any alarms present
(2) PRG return to the “main” screen
from the “main” screen access the main menu
(3) ESC return to the previous screen/display
(4) UP circular navigation inside the menus, the screens, the
parameters and the values of the parameters
from the “main” screen, access an “INFO menu”
(5) ENTER select and confi rm (like the “Enter” key on a computer
keyboard)
from the main menu, access the “SET” screen
(6) DOWN circular navigation inside the menus, the screens, the
parameters and the values of the parameters
from the main screen, access the pLAN screens and connect
to the SLAVE cabinets
5.5 “Main” screen
1
2
3
4
6
5
7
8
9
(1) description of unit status (*)
(2) line 2 description of unit status (**)
(3) value read according to the type of signal connected
(4) status of the atomising nozzles:
atomising nozzles
operating
atomising nozzles
off
(5) time bands set
(6) access the “INFO” screen (UP button)
(7) access the “SET” screen (ENTER button)
(8) access the “pLAN” screen (DOWN button)
(9) Symbol on display:
no image: master unit not connected to a network (stand alone)
master unit connected to a pLAN network for multiple spaces
master unit connected to a pLAN network for single spaces
slave unit