9
ENG
“Wellness” +0300060EN - rel. 1.2 - 03.09.2012
installer
user
ser
vice
1.7 Fitting the front cover
Models UE001 to UE018
1
3
4
2
Fig. 1.i
1.
turn the red oval-shaped plate with the CAREL logo, revealing the
fastening hole below;
2.
slip the cover onto the frame (keeping it slightly oblique), until it rests
on the rear edges, paying attention to the positioning holes on the
side;
3.
tighten the earth screw using a screwdriver;
4.
turn the red oval-shaped plate with the CAREL logo until covering
the fastening holes.
Models UE025 to UE065
1
2
Fig. 1.l
1.
slip the cover/covers onto the frame (keeping it/them slightly raised
and tilted), until it rests on the rear edges;
2.
tighten the screws on the top of the humidifi er using a screwdriver.
Important
Important: in models UE025 to UE065 open the electrical
compartment on the humidifi er using the lock with slot.
Fig. 1.m
1.8 Components and accessories
Once having opened the packaging and removed the front cover of the
humidifi er, make sure the following are included:
kit of screws with plugs for
wall-mounting;
kit code 98C565P009 of
connectors for the electronic
board
kit code 98C565P012
of connector with label
and cable gland for the
connection of the utility
cables (light, fans, essences
and sanitisation pump)
fi lter code 98C565P016 for fi ll
solenoid valve
kit code 98C565P018 of
connectors for terminals with
voltage-free contacts
models UE025 to UE065 only:
code FWHDCV0000 non-
return valve with connection
pipe
UE025 to UE065 only: angular
plastic hose (drain water
connection).
