Carel humiSteam Basic UE001, User Manual

Page: 49 / 84

9
ENG
“UE B A SIC” +0300042IE - rel . 1 . 6 - 21 . 11 . 2019
1.7 Fitting the front cover
M ode l s UE00 1 to UE0 1 8:
1
3
4
2
Fig. 1.g
1 . turn the red oval - shaped plate with the C A REL logo , revealing the
fastening hole below;
2 .
slip the cover onto the frame (keeping it slightly oblique) , until it rests
on the rear edges , paying attention to the positioning holes on the
side;
3 .
tighten the earth screw using a screwdriver;
4 . turn the red oval - shaped plate with the C A REL logo until covering
the fastening hole below .
M ode l s UE0 2 5 to UE06 5 :
1
2
Fig. 1.h
1 . slip the cover/covers onto the frame (keeping it/them slightly raised
and tilted) , until it rests on the rear edges;
2 .
tighten the screws on the top of the humidi fi er using a screwdriver .
Important : in models UE025 to UE065 open the electrical
compartment on the humidi fi er using the lock with slot .
Fig. 1.i
1.8 Components and accessories
Once having opened the packaging and removed the front cover of the
humidi fi er , make sure the following are included::
Ƒ
kit of screws with plugs for
wall - mounting
Ƒ
kit code
98C6 1 5 P00 3
of connectors for the
electronic board
Ƒ
models UE025 to UE065
only : code FWHDCV0000
non - return valve with
connection pipe
Ƒ
models UE025 to UE065
only: angular plastic hose
(drain water connection) . .