Carel HDU05RM230, User Manual

Page: 9 / 22

Humidisk - user manual Rel. 1.2 del 18/03/99
5
3.2 Hydraulic connections (Fig. 3)
Connect the water supply pipe using a 3/4" female coupling and the connector (Ref. 3).
Connect a rubber hose with 10mm diameter to the overflow connector (Ref. 5) which, in the event of malfunction of
the closing float, allows the excess water to flow out (Fig.3).
Install the appliance in the highest possible position, but keeping a distance of at least one metre from the ceiling (Fig.1, Fig.2).
To avoid dripping, the spray of humidified air leaving the appliance must not strike any obstacle.
Turn the fairing (D) horizontally so that the flow comes out in the desired direction.
Fit the SAFETY fixing brackets (2) as shown in Figure 3.
Connecting the humidifier
Fig. 3
3.3 Setting humidifier capacity
In order to set the humidifying capacity follow these instructions:
•
unfasten the screws (B) under the fairing and slide the ring (A); the further the ring is pushed into the fairing (D), the
lower the humidifying capacity of the appliance is. The capacity ranges between 1.5 l/h (min) and 5 l/h (max.);
•
fasten the ring in one of the three possible positions with the screws provided, matching the holes (C) in the ring (A)
with the holes (C') in the fairing.
Fig. 4