Carel HDU05RM230, User Manual

Page: 7 / 22

Humidisk - user manual Rel. 1.2 del 18/03/99
3
3 Installation
3.1 Mounting
When you unpack the humidifier you will notice that it consists of two separate parts, different even from the electrical
point of view:
•
main motor-fan element
•
supporting structure (base).
Before assembling the components decide in which direction you want to position the nozzles allowing the atomized
water to be spread in the environment. Finally fix the safety fixing brackets (see fig. 3).
3.1.1 Hanging mounting
To hang the appliance at the ceiling, connect it with chains or metal cables to the rings provided (8), respecting the
minimum dimensions indicated in fig.1.
The minimum vertical distance from the ceiling must be 1000mm; the minimum horizontal distance from the wall
must be 114mm. Unit’s weight is 20Kg (fully loaded). The machine has to be installed in horizontal position.
Important: do not use hemp ropes or ropes made of any material that is sensitive to humidity.
3.1.2 Wall mounting
The minimum vertical distance from the ceiling must be 1000mm; the minimum horizontal distance from the wall
must be 114mm.
Use the special brackets (9) supplied with the appliance (fig.2). Fix the brackets (9) to the appliance using the screws
provided for the purpose.
Mark the holes on the wall where you want to install the appliance, respecting the distances between the holes on the
supporting brackets (9), so that, once it has been installed, the appliance is in horizontal position. The supporting
brackets are made in such a way that they keep the appliance at the right distance from the wall.