CareFusion MicroDL, Operating Manual

Page: 29 / 144

27
Configuring the MicroDL with SPCS
The MicroDL can be set up using SPCS. First, ensure that the
MicroDL is connected to the PC using the cable supplied. Connect
the nine way ‘D’ connector to the serial port of the PC and the 3 pole
jack plug to the socket in the right hand side of the MicroDL.
To communicate with the PC the MicroDL must be turned on in PC
mode. Depress the ‘enter’ key, turn the unit on, and release the
‘enter’ key when the display shows:
Start SPCS on the PC. Ensure that SPCS is set up to use the COM
port on the computer that the MicroDL is connected to (refer to
online SPCS help). A patient record should then be set up
containing the details to be downloaded to the MicroDL (or an
existing patient selected). These details can then be used to
initialise the unit. Please refer to the online help included with SPCS
for the exact details for performing these operations.
NOTE: Keep the PC out of reach of the patient when connected to
the MicroDL. The MicroDL should only be connected to a computer
that is manufactured in accordance with EN60950 1992/1993 ‘Safety
of Information Technology Equipment including Electrical Business
Equipment’.
Uploading Results
To upload the results stored in the MicroDL, connect the unit to the
PC as described above and start SPCS. When the initial screen is
displayed, click on the ‘upload‘button. The data contained in the