CareCo Tuni Bossa, Owner'S Handbook Manual

Page: 7 / 12

To continue mobility, release the brake handles.
To lock the hand brake, push down on the
bottom portion of the brake handle as shown in
figure 5 until an audible
“click” is heard. To
release pull up on the
top part of the brake
handle as in figure 5:
Figure 5
Figure 6
Test the brake. If the tension of the brake
handle is too loose/tight, perform the following
as shown in figure 6:
1. Loosen the Phillips screw on the brake
clamp.
2. Pull the brake wire further through the brake
clamp.
Note: There will be additional excess wire. It may
be necessary to fold wire up to keep wire from
interfering with brake action.
Repeat this process for the other brake.
Cable Adjuster Unit