CareCo Tuni Bossa, Owner'S Handbook Manual

Page: 6 / 12

The rollator height should be adjusted so that
when the user’s arm is down by their side, the
hand grip is at wrist height. This will ensure the
arms are at an approximate 20°-30° bend when
using the rollator.
To adjust the height, release the quick release
lever and adjust the handrails upward or
downward to the desired height. Ensure the
quick release lever is fastened again once the
correct position is found as in figure 3:
To adjust the backrest, loosen the knob
attached to the backrest fabric, as shown in
figure 4:
Figure 3 Figure 4
Quick Release Lever Knob
Pull the top of the brake handles up towards the
hand grips to activate the hand brake.
To remain stationary, continue to hold the brake
handles up.
Using the Hand Brake
Adjusting the Height of the Rollator