background image

•  Clean wheels with warm water and  

detergent, dry wheels with a clean cloth.  

If wheels squeak, please add 3-in-1  

lubricating oil regularly.

•  Ensure that every part of the rollator is  

secure at ALL times. 

•  Check all screws regularly and make sure 

the seat tubes are fixed into the side slot 

properly - if not, press it again to secure. 

•  Ensure the quick release wheels are  

assembled correctly. 

•  Ensure the metal buttons are protruding 

from the handle tube. 

•  Replace any broken, damaged or worn 

parts immediately. 

•  Wash the bag with water or gentle  

detergent.

Care and Maintenance

Your Tuni branded product is under warranty 

to be free from defects in material and 

workmanship for one year from date of receipt. 

The warranty does not extend to non-durable 

parts, such as rubber accessories, castors and 

grips, which are subject to normal wear and tear 

and require periodic replacement.
If you have any queries please contact your 

supplier

The manufacturer reserves the right to alter without notice any weights, measurements 

or other technical data shown in this manual. All figures, measurements and capacities 

shown in this manual are approximate and do not constitute specifications.

Warranty

Summary of Contents for Tuni Bossa













Reviews: