www.careco.co.uk
CareCo, Hubert Road, Brentwood, Essex, CM14 4JE
8
Digi Blood Pressure Monitor -
DL08146
Adapter usage (option)
1. Optional AC adapter should comply with the requirement of IEC 60601-1 :2005. Furthermore all
configurations shall comply with the requirements for medical electrical systems (see IEC 60601-
1-1 or clause 16 of the 3Ed. of IEC 60601-1, respectively). Anybody connecting additional equipment
to medical electrical equipment configures a medical system and is therefore responsible that the
system complies with the requirements for medical electrical systems. Attention is drawn to the
fact that local laws take priority over the above mentioned requirements. If in doubt, consult your
local representative or the technical service department.
2. When using AC power, to avoid possible damage to the monitor, use only the exclusive AC
adapter that can be purchased from authorized dealers. Other adapters may vary in output voltage
and polarities.
3. Insert the adapter plug into the hole on the backside of the unit as picture.
4. Insert the other side of the adapter into the outlet with 100-240V.
5. To remove the AC adapter, disconnect the adapter plug from the outlet first and then disconnect
the cord from the unit’s socket.
Adapter technical features:
Output voltage: 6V 5%
Max. output current: At least 600 mA
Output plug polarity: <+> inner
External diameter: 5.5mm 0.1 mm
Internal diameter: 2.1mm 0.1mm
